Store >  Water Pumps >  Plumbing Fittings >  Penductors | Mazzei Injectors >  [ Mazzei Injector 3/4 inch ports MPT, 584, 384 gph ]


Mazzei Injector 3/4 inch ports MPT, 584, 384 gph

Product #PF-MZ584


Availability: Temporary not available

Description: 3/4 inch MPT Mazzei injector model number 584, 384 gph with 3/4 inch MPT intake and outlet. The suction end is a 1/4 inch tubing barb with 1/4 inch MNPT, end user chooses which to use.
Brand: Mazzei Injectors


Product Information




3/4 inch MPT Polyethylene Mazzei injector model number 584, 384 gph with 3/4 inch MPT intake and outlet. The suction end is a 1/4 inch tubing barb with 1/4 inch MNPT, end user chooses which to use.

Mazzei Injectors are high-efficiency, venturi-type, differential pressure injectors with internal mixing vanes. When a sufficient pressure difference exists between the inlet and outlet ports of the injector, a vacuum is created inside the injector body, which initiates suction of a liquid or gas through the suction port.

Mazzei Injectors are ideal for controlling the proper amount and distribution of additives for freshwater / saltwater fish tanks and aquariums

How a Mazzei Injector Works
When pressurized water enters the injector inlet, it is constricted toward the injection chamber and changes into a high-velocity jet stream. The increase in velocity through the injection chamber results in a decrease in pressure, thereby enabling an additive material to be drawn through the suction port and entrained into the water stream. As the jet stream is diffused toward the injector outlet, its velocity is reduced and it is reconverted into pressure energy (but at a pressure lower than injector inlet pressure).

Mazzei Injectors are extremely efficient. They operate over a wide range of pressures and require only a minimal pressure differential between the inlet and outlet sides to initiate a vacuum at the suction port.

Special Features


NEW INTERNAL VANES are positioned to maximize injector efficiency, suction capacity, and mixing capabilities
TROUBLE-FREE OPERATION with no moving parts
PROVEN PERFORMANCE with years of expected service
No electrical connections needed
Can run dry with no problems
Considerable cost savings versus other injection methods
Safe to use as the chemicals are under vacuum, not pressure
Constant injection of assures UNIFORM DISTRIBUTION OF MATERIAL

Specializing in

Ag Irrigation - Chemical Addition - Wastewater Aeration - Ozone Systems

Mazzei Injector Company manufactures high efficiency venturi-type patented Mazzei Injectors for injecting liquid or gas additives into water, Mixing Nozzles, and GDT Degassing Separators for removing gases from water. Our engineering staff can assist with product selection and application.


  • Weight: 0.15 lb
  • Height: 6 in
  • Width: 3 in
  • Depth: 1 in
Usually ships same day

PF-MZ584

Product Rating

  • No reviews for this product have been submitted

Place Order


List Price: $59.39
Our Price: $39.59
  (save $19.8, 33%)
Temporary not available
Add To Wish List


Related Products

ESV B-Ionic Doser Pump with 1/2 gallon reservoirs
List Price: $335.99
Our Price: $223.99
(save $112, 33%)
Pondmaster Deep Water AP-20 Air Pump, Danner
List Price: $130.49
Our Price: $114.99
(save $15.5, 11%)
DISCONTINUED-AE Tech Media Melter 300 Calcium Reactor
List Price: $502.49
Our Price: $334.99
(save $167.5, 33%)
DISCONTINUED - Media Melter 400 Calcium Reactor, AandE Tech.
List Price: $581.99
Our Price: $387.99
(save $194, 33%)
Gen -X Ozone Generator
List Price: $138.59
Our Price: $92.39
(save $46.2, 33%)
Red Sea Co2 Pro System Deluxe
List Price: $321.74
Our Price: $214.49
(save $107.25, 33%)
Plankton Light Reactor, Aqua Medic
List Price: $419.09
Our Price: $279.39
(save $139.7, 33%)



FAQ/Wiki


Hydroponic Supplies


Wholesale Accounts