Store >  Filtration Supplies >  Nitrate Reductors | Nitrate Media >  [ DeNitrate 1 L (33.8 oz) Seachem ]


DeNitrate 1 L (33.8 oz) Seachem
Back Order

Product #FI-SC137


Availability: Back Order

Description: Seachem DeNitrate 1 Liter (33.8 oz) is an natural, porous material that promotes both aerobic nitrification within the first few millimeters of depth and anaerobic denitrification at the core
Brand: Seachem


Product Information




Seachem DeNitrate 1 Liter (33.8 oz)

DeNitrate is an economical, natural, porous material with a pore distribution and geometry that promotes both aerobic nitrification within the first few millimeters of depth and anaerobic denitrification at the core. The material has a high surface area and supports a high density of bacteria. Although DeNitrate has capacity to trap nitrate, this, as with other nitrate retaining materials, such as certain zeolites and synthetic resins, is quite limited and the primary mechanism of nitrate removal is anaerobic.

Why It's Different

Live rocks or reef rocks remove nitrate by anaerobic denitrification. DeNitrate removes nitrate by the same process. Efficiency is magnified several folds by forcing the water to filter through the porous DeNitrate. As with reef rock, anaerobic conditions are achieved by the porosity and the depletion of oxygen by the aerobic process at the surface. Excessive flow rates should, therefore, be avoided, as they may impede development of an adequate anaerobic environment to support denitrifying bacteria.

DeNitrate is also an excellent media for aerobic nitrification and it makes an ideal biological filter in drip trays, canister filters, sumps, or even box filters. At high flow rates (greater than 100 US gallons per hour), it will function solely as an aerobic filter. At slow flow rates (less than 50 US gallons per hour), it will function as both an aerobic filter and an anaerobic denitrifying filter.

DIRECTIONS: For best results, DeNitrate should be placed to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons*) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix. It is best to rinse off dust before use. Once DeNitrate has been in use for several days, nitrate concentrations should start to fall and level off gradually at a concentration of about 4-5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted.

Each 500 mL of DeNitrate treats about 100-200 L (25-50 gallons*), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes.


  • Weight: 1.75 lb
  • Height: 8 in
  • Width: 4 in
  • Depth: 3.9 in
Usually ships same day

FI-SC137

Product Rating

  • No reviews for this product have been submitted

Place Order


List Price: $13.19
Our Price: $8.79
  (save $4.4, 33%)
Qty:
Add To Cart
Add To Wish List


Related Products

Seachem DeNitrate 2 L (67.6 oz)
List Price: $23.09
Our Price: $15.39
(save $7.7, 33%)
Seachem DeNitrate 4L (1.1 gal.)
List Price: $37.94
Our Price: $25.29
(save $12.65, 33%)
Seachem DeNitrate 20L (5.3 gal)
List Price: $151.79
Our Price: $101.19
(save $50.6, 33%)



FAQ/Wiki


Hydroponic Supplies


Wholesale Accounts