Store >  Chillers >  In-Line Chillers >  [ DISCONTINUAqua Logic TrimLine DeltaStar InLine Chiller 1/3hp ]


DISCONTINUAqua Logic TrimLine DeltaStar InLine Chiller 1/3hp

Product #CH-ALTLD-4


Availability: No longer available

Description: DISCONTINUED - Aqua Logic Trim Line Delta Star In-line chiller 1/3 horsepower. Includes titanium coil, single stage digital controller, and 2 year warranty. 4050 BTU removal capacity. 19 inches long by 9 inches wide by 21 inches tall. 7.2 amps.
Brand: Aqua Logic


Product Information




DISCONTINUED - Aqua Logic Trim Line Delta Star In-line chiller 1/3 horsepower.

Includes titanium coil, single stage digital controller, and 2 year warranty. 4050 BTU removal capacity. 19 inches long by 9 inches wide by 21 inches tall. 7.2 amps. Recommended flow rate is 10 - 20 gpm.

Fresh or Saltwater Use, Compact Design, Quiet Operation,

Black ABS Cover, Remote Electronic Temperature Controller

Ozone Friendly Refrigerant (134A)

If you have any questions or not sure which chiller is right for you, contact our office for help with your specific application.

Model Number, TLD-4
Horsepower, 1/3
BTU/H Removal Capacity, 4,050
Volts, 115
Amps, 7.2
Flow (gpm) Min/Max, 10/20
In/Out FIPT (inch), 3/4
Length (inches), 19
Width (inches), 9
Height (inches), 21 1/2
Weight, 60 lbs.

Applications:
Aqua Logic manufactures Trimline chillers for a wide variety of applications. Since one chiller does not fit all chillers are designed and build for specific uses. For example Marine Reef Tanks are typically maintained at a constant temperature of 76 - 78F while bait tanks are cooler, around 50 - 55F. Research applications requires the chiller to maintain a wide range of temperatures as low as 35F during some portion of the experiment and as high as 80F during other times. Each of the scenarios requires the chiller to be manufactured with different parts so they operate at their maximum efficiency.

Our standard Trimline units (1/5 - 1/2 hp) are for applications where the temperature to be maintained is in the range of 65 - 80F such as reef tanks and warm water fish exhibits. The units with option A, coldwater cap tubes, are designed for a temperature range of 50 - 65F for bait fish and temperate fish exhibits.

Our Standard and Option A units are manufactured with a capillary tube of a size and length that allows a fixed amount of refrigerant to enter the titanium coil of the heat exchanger.

Guidelines:
One of the most important things to keep in mind when you position your chiller is air flow. Fresh air flow should never be restricted to the condenser (looks like a car radiator) and the hot air discharged must not be restricted when it leaves the unit.

Chillers should not be placed in a confined space such as a cabinet or closet as temperatures can easily get over 90F thus reducing the efficiency of the chiller and possible failure. Also if there are open sumps heat from the chiller will go right back in the water and could cause your tank to heat up. The moist salty air will also cause corrosion of the condenser and other external parts resulting in failure of the chiller.

Delta Star inline chillers require a pump to move water through the heat exchanger and Cyclone drop in chillers require water passing by the coil at all times. Correct water flow rates are critical for chillers to operate properly. Refer to the chiller flow rate and pump selection chart to select the best pump for your chiller. Always use an external pump as submersible pumps add heat to the water.

Sizing:
While standard Btu calculations will give you a good starting point for sizing, many environmental and system design parameters must be considered. While sizing charts can be helpful, one chart DOES NOT work for all chiller installations.

Sizing charts for marine reef tanks (under 1500 gallons) are based on typical setups using the common life support equipment (LSS), such as pumps, filters, and lighting.

As always we have a staff of technicians that are ready to help answer any technical questions you may have.


  • Weight: 65.2 lb
  • Height: 29 in
  • Width: 26 in
  • Depth: 16 in
Usually ships same day

CH-ALTLD-4

Product Rating

  • No reviews for this product have been submitted

Place Order


List Price: $1733.99
Our Price: $1314.99
  (save $419, 24%)
No longer available


Related Products

Aqua Logic Delta Star Chiller 1/2 hp DS-5 115V
List Price: $2443.49
Our Price: $2099.99
(save $343.5, 14%)
Aqua Logic Delta Star Chiller 1/4 hp DS-3 115V
List Price: $1513.49
Our Price: $918.99
(save $594.5, 39%)
DISCONTINUED -Aqua Logic Delta Star Chiller 1/5 hp DS-3 115V
List Price: $1274.99
Our Price: $849.99
(save $425, 33%)
Aqua Logic Delta Star Chiller 1/3 hp DS-4 115V
List Price: $1616.99
Our Price: $1039.99
(save $577, 35%)
Aqua Logic Delta Star Chiller with Thermal Expansion Vavle 1
List Price: $2199.99
Our Price: $1299.99
(save $900, 40%)
1/3 HP Chiller CL-850, Pacific Coast Chiller
List Price: $1268.84
Our Price: $845.89
(save $422.95, 33%)
TradeWind Chillers Compact 1/3 HP Inline Chiller
List Price: $1138.49
Our Price: $858.99
(save $279.5, 24%)



FAQ/Wiki


Hydroponic Supplies


Wholesale Accounts